Visit us at
crlaurence.com
for international toll free information 2
A
C.R. LAURENCE Co., INC.
GENERAL SAFETY RULES
WARNING!
For your own safety read this manual carefully before using the tool. Failure to follow
all instructions below may result in electric shock, fire and/or serious personal injury.
OpERATION:
1. Insert the bit into the chuck until it snaps into place.
2. Start the tool by squeezing the trigger switch. LED work lights will turn on when trigger
switch is activated.
3. Forward/Reverse switch, located above trigger switch, is marked with forward and reverse arrows.
TROUBLESHOOTING TIpS:
Screwdriver does not work?
• Press the LED battery level indicator and make sure that the unit is fully charged.
Maintenance
• Use only mild soap and a damp cloth to clean the tool.
• Do not allow any liquids to get inside the tool.
• Do not immerse any part of the tool in liquids.
SpECIFICATIONS:
pistol Driver
Voltage……………………………..…..................3.6 Volts (DC)
Torque…………………………............................3 N.m
Speed (no load)………………………………...…150RPM
AC Adaptor - LD813
Input……….............110 Volts (AC)/60Hz
Output……….......... 5 Volts (DC)/300mA
Charging Time……. 5 to 7 hours (max.10 hours)
WORK AREA
1. To prevent accidents, keep your work area clean and well lit.
AC Adaptor - LD813EU/AU
Input……….............220-240 Volts (AC)/60Hz
Output……….......... 5 Volts (DC)/300mA
Charging Time……. 5 to 7 hours (max.10 hours)
