CRL DLLPA, Assembly Instructions Manual

Page: 2 / 10

CRL LOCKING LADDER PULL ASSEMBLY
ALUMINUM
2 crlaurence.com | usalum.com
ABOUT THIS MANUAL
The procedures covered in this manual are not needed for regular installations. This manual covers the
procedures needed to paint Ladder Pull Handles. Please store screws and internal mechanisms in a safe
place until you are ready to reassemble. Refer to the 11M0189 Locking Ladder Pull Installation Manual to
install the reassembled handles onto your door.
NOTE: LLPA shown. LLUPA and DLLPA similar
TABLE OF CONTENTS
ABOUT THIS MANUAL 2
DISASSEMBLE HANDLE 3 - 5
Separate Interior and Exterior Handles 3
DISASSEMBLE INTERIOR HANDLE 4
Remove Cam and Thumb Turn 4
Remove Bottom Mounting Post, Internal Housing and Transmission Cover 4
DISASSEMBLE EXTERIOR HANDLE 5
Remove Bottom Mounting Post 5
Remove Lock Cylinder 5
ASSEMBLE INTERNAL HANDLE 6 - 9
Install Internal Housing 6
Test and Adjust Internal Housing 7
Install Thumb Turn 8
Secure Internal Housing to Tube 9
Install Bottom Mounting Post 9
Install Cam 9
ASSEMBLE EXTERNAL HANDLE 10
Install Lock Cylinder 10
Install Bottom Mounting Post 10