3
Install Lock Cylinder at exterior and Housing Adaptor at interior.
Align Bottom Mounting Post and secure.
2
Slide Exterior Housing onto tube from bottom and align at cutout.
Secure External Housing to tube.
1
1
Exterior
Housing
Bottom Tube
NOTE: Handle shown from side.
4
A
4
3
B
4
A
2
Lock Cylinder
Tail Piece
EXTERIOR
Housing
Adaptor
Lock Cylinder Tail Piece fits inside
hole in Housing Adaptor.
B
2
2
C
2
D
Secure Cylinder to
Housing Adaptor.
Align screws to holes in
Cylinder Plate.
Secure Housing Adaptor
to Exterior Housing.
Fit locknuts
on screws.
3
Insert Set Screw through hole in
Exterior Housing. Tighten to secure.
B
4
Use 6 mm
Allen Wrench
to secure.
4
C
Spacers
Rubber
Washer
NOTE: Mounting Post fittings assembly shown as
handle is originally shipped. Spacers fit through holes
in glass door. Refer to 11M0189 Locking Ladder Pull
Installation Manual to install handle on door.
Rubber
Washer Metal
Washer
Connecting
Grommet
Screw
A
4
Insert Bottom Mounting Post
in hole in bottom tube.
CRL LOCKING LADDER PULL ASSEMBLY
ALUMINUM
10
crlaurence.com | usalum.com
ASSEMBLE EXTERNAL HANDLE
Install Lock Cylinder
Install Bottom Mounting Post
