Crivit Z31222, Operation And Safety Notes, Page: 13 / 71

13 GB/CY
You can choose between the following sub-function in the stopwatch mode:
CHRONO (Stopwatch)
DATA RECALL (data recall)
Stopwatch
Press the SET button 3 to start / stop the stopwatch..
Press the SELECT button 2 to record a lap time in the lap memory
while the stopwatch is running.
Note: 99 laps can be saved. „MEMORY FULL“ will appear in the
display when the lap memory is full.
Note: You can only switch between „CHRONO“ and „DATA
RECALL“ if at least one lap has been recorded / stopped.
Press and hold down the SET button 3 to reset the stopwatch display
and the lap counter to 0.
Stopwatch mode Total time Lap memory full
Lap memory
Lap
time
Stopwatch memory recall
Press the SET button 3 to stop the stopwatch.
Press the SELECT button 2 to proceed to the memory recall mode. In
the display „BEST LAP“ and the records of the BEST LAPS will appear.
Press the SET button to read the different lap memories.
Press the SELECT button to leave the memory recall mode.
Follow the diagrams to carry out a standard measurement, a lap time
measurement and a memory recall: