Crivit Z31222, Operation And Safety Notes, Page: 12 / 71

12 GB/CY
Press the SELECT button to set the hours. Press the SET button to
proceed to the next setting “Cd r”.
The countdown can be set at maximum 23 hours and 59 minutes.
Confirm your setting by pressing the MODE button 1 .
Timer Types:
r:
The timer begins to count down the previously set time until 0 is
reached.
U: The timer begins to count up the previously set time until 0 is reached.
S: The timer stops as soon as 0 is reached.
The following applies to all three timer types:
Press the SET button 3 . The timer starts.
Press the SET button again. The timer stops.
Press the SET button again. The timer continues to count.
Press the SET button again and hold for about 3 seconds. In this way,
the timer is set back to the originally set time.
When the timer reaches 0, an alarm signal buzzes for 15 seconds.
Press the SELECT button 2 , the SET button 3 or the MODE button 1
to stop the alarm signal.
Stopwatch Mode
Press the MODE button 1 until the display „CHRONO“ appears to
proceed to the stopwatch mode.