9
1. Open the valve stopper (1a) (figure B).
2. Press the valve shaft (1b) (figure B) together
and pump up the air chamber until the article
is sufficiently taut.
3. Close the valve stopper and press the valve
into the mattress applying gentle pressure.
Empty the air
1. Pull the valve out.
2. Press the valve shaft together slightly so that
the air can escape.
Or insert the ventilation tube into the closure in
order to allow the air to escape quickly.
Repair
Small leaks or holes can be rectified using the
enclosed repair patch.
Important! After repairing this product,
do not inflate it for at least 20 minutes!
Do not use the patch for leaks or holes
on the seam.
- Let all the air escape from the product.
- Clean the area around the leak thoroughly!
This area must be dry and free of grease or oil.
- Cut off a piece of the repair patch, which is
approx. 1.3cm larger in diameter than the
damaged area.
- Pull the patch off of the paper and place it on
the damaged area and press down firmly.
Storage, cleaning
Always store the product in clean and dry condi-
tion, deflated and at room temperature.
The valves should always be closed during
storage. Only use water and a soap solution to
clean the product, never use aggressive cleaning
agents.
When you store the product over the winter do
not place any sharp objects on the product and
do not use talcum powder on it.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the packa-
ging materials out of the reach of children.
Service handling
IAN: 282273
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: [email protected]
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
GB/IE
