34
2. Push down into the ventilation opening the half of the attachment
stopper that is not yet in the ventilation opening by twisting the
attachment onto the helmet applying pressure.
Note: We recommend using a non-pointed pen or similar
as an aid to push down the attachment into place. Please
take care not to damage the article or injure yourself.
In order to remove the attachment, pinch the sides of the attachment
together and pull it out of the helmet.
Maintenance and care
Regular maintenance and care contributes to ensuring the safety and
preservation of the helmet.
• Always use a pH-neutral detergent diluted in clear water; carefully
rub with a soft cloth. Then dry with a lint-free cloth.
• The padding may be cleaned with a little soap, using a soft brush.
Inner pads
• Hand wash below 30 °C.
30 °C/86 °F
• Allowed to dry at room temperature.
Storage
Store the helmet in a dry, well ventilated location at room tempera-
ture when not in use. Avoid heat sources.
GB
