© 2015 All rights reserved. Data subject to change without notice.
15
Rev. D | 2015.04
YESDUST - Operation Manual
Step 3:
Insert the batteries into the battery holder, taking care to match the polarity markings.
WARNING: USE RECHARGEABLE NICKEL HYDRIDE BATTERIES ONLY. USING NON-
RECHARGABLE BATTERIES MAY RESULT IN DAMAGE TO THE UNIT.
Step 4:
Replace the front cover and secure it with the screws.
Connecting to a YES Multi-Channel Monitor
NOTE:
Ensure that the YES multi-channel monitor is po
wered off before connecting the
YESDUST.
Step 1:
Connect the included communications cable to the DATA OUT port on the YESDUST
Step 2:
Connect the other end of the cable to the AUX port on the YES multi-channel monitor.
Step 3:
Set the switch on the YESDUST to the ON position. The COMM light will turn on red to indicate
that there is power but the YESDUST has not established communications with the YES multi-
channel monitor.
Step 4:
Power up the YES multi-channel monitor.
Step 5:
Once communications have been established, the COMM light will turn green, and occasionally
fl ash amber during communication.
Monitoring
Step 1:
Connect the YESDUST to the YES multi-channel monitor.