2
1
PRECAUTIONS
–
WARRANTY
The CRISTEC equipment includes the following :
•
A box containing the battery charger's electronic function.
•
This user manual
•
Specific packing
This document applies to battery chargers from the YPOWER range as listed on the cover (available in colour on our
website www.cristec.fr).
The manual is intended for users, installers and equipment maintenance staff. Please read this manual carefully before
working on the charger.
This manual should be kept safely and consulted before attempting any repairs because it contains all the information
required to use the appliance.
This document is the property of CRISTEC; all the information it contains applies to the accompanying product. CRISTEC
reserves the right to modify the specifications without notice.
1.1
P
RECAUTIONS
(
WARNING
)
–
PROVISIONS RELATING TO SAFETY
Material class III according to NF EN 60335-2-29 standards.
The requirements for installation are contained in the NFC 15-100 standards.
The installation must be carried out by an electrician or a professional installer.
The DC network must be disconnected before starting any maintenance work on the equipment.
This equipment is not intended to be used by children.
Main precaution
Before handling the charger, please read carefully this manual.
Precautions regarding electric shocks
Risk of electric shock and danger of death: it’s strictly forbidden to interfere with the charger when
under voltage.
Precautions regarding overheating of the appliance
This appliance is designed to be mounted on a vertical wall or partition as indicated herein.
It is imperative that there be a gap of 150mm around the charger. The installer must ensure that
the temperature of the air at the input is lower than 65°C in extreme operating conditions.
Measures should also be taken to allow for the evacuation of hot air on either side of the charger.
It’s strictly forbidden to put any device on or against the charger.
The charger must not be installed near a heat source ; it should be installed in a well-ventilated
area. The charger's air inlets and outlets must not be obstructed.
Attention hot surface : do not touch the charger during and after its operation (burn
hasard).
