RR400/420 User Manual - CRISARTECH
Firmware version 190122 - © CRISARTECH 2019 - Page 22 / 29
10 Shifted start
In some rallies, the Regularity Tests are "included" in the links, ie the distance is not reset to 0 from the RT start.
10.1 Function activation
To do this, check the box "
Shifted start
" in "
Guidance options
". By doing this, the Trip1 is not set to 0
automatically when the timer starts and the timer takes into account the distance to the counter at the start for his
calculation for lead / delay.
10.2 Average speeds changes since the beginning of the road book
Generally, the distances of the average changes are given starting from beginning TC of the section of the road-
book, and not from the beginning of the RT as usual.
It is then necessary to check the box "
Km from start RB
" located under the table of distances / averages.
Warning: this box only appears in
Expert
mode.
We must fill the distance boxes with the km that do not start at 0, even if the distance indicated in the first box (not
modifiable) is 0. This is not a problem, because what matters is the km end of the first segment, the one that gives
the first change of average.
Example:
-
departure from the RT to 28.5 km at 49.00 km / h
-
change of average to 30.0 km (after 1.5 km) at 50 km / h
-
change of average to 32.0 km (ie after 2 km) at 45 km / h
-
end at 35.0 (after 3 km) km
Note: timings must not be taken into account.
10.3 Average speeds changes since the beginning of the RT
In some rallies, even if the Trip1 is not reset to 0, the average changes distances can be given from the beginning of
the RT, when the timer is started. This is the case if the starting point is secret (not indicated in the road book).
Example: distances / speeds idem previously:
