RR400/420 User Manual - CRISARTECH
Firmware version 190122 - © CRISARTECH 2019 - Page 18 / 29
Menu - Config. equipment - Alerts config.
6 Operating modes
This system has 3 operating modes, to be chosen at the bottom of the main menu, depending on the co-pilot's
experience.
6.1 Begginer
This mode displays a help grid to know the different sensitive areas.
It hides certain complicated parameters:
-
clock shift,
-
setting the number of km / h by buzzer beep,
-
conditions of lighting of the bargraph,
-
number of meters added / removed with each press on button box ...
Attention: the
automatic start of the chrono can only be done on each full minute
.
6.2 Confirmed
Mode to be used as soon as the user feels comfortable with the machine to take full advantage of it.
6.3 Expert
This mode deletes the help buttons and adds a history of distance modifications, manual or automatic (GPS).
7 USB drive usage
Important:
It is strongly recommended to format your USB drive on the device before using it. This
function erases ALL data and then formats and conforms it for use with this device.
To access this function, in the main configuration page, press the button with the USB drive:
->
Attention:
-
this operation erases ALL the data present on the key, even if they were written with a computer or a tablet,
-
it is advisable to wait ten seconds after the end of the operation, when the display asks to remove the key.
