KITS WITH 3.5” LCD MONITOR:
RED
BLACK
12V Reverse Power Input
Chassis Ground
Video in from PlateCam
3A Mini ATC Fuse
SIDE VIEW: SV-8500 3.5" LCD Monitor Installation
WINDSHIELD
UNIVERSAL MOUNTING POST
Set to desired location
No Hardware Required
1. Choose desired location and clean surface.
2. Remote adhesive backings from mount.
3. Firmly press the against mounting.
Peel Adhesive
Backing
Peel Adhesive
Backing
or Mounting
Surface
3.5" Monitor
TECH SUPPORT: (800) 998-6880
SPECIFICATIONS:
1/3 inch CCD sensor
Sizes: Full Frame 12.5W x 7”H x 1.8” D
Video Output: 1.0 V P-P composite (75 Ohm load)
Bar: 12.5W x 1.7”H x 1.8” D
Supply Voltage: +12VDC
Weight Full 6 Oz.) Bar: 4 Oz.
Power Consumption: 180mA typ.
Pixels: 512 (H) x 492 (V)
Electronic Shutter: 1/50 s – 1/100000s
Resolution: > 250,000 pixels
White Balance: Automatic
More than 330 TV lines
Gamma Correction: 0.45
Minimum Illumination: 1 LUX / F 1.2
S/N Ratio: More than 48dB
Lens Type: Wide Angle
Operating Temp: -13 to 185 F (-25 to 85 C)
Horizontal Angle: 130
Gain Control: Automatic
Vertical Angle: 90
Digital Signal Processor w/10 Bit A/D Converter
7
