14
#3
#1
#2
#4
LOCK
TRUNK
PANIC
UNLOCK
BANK #2
FLASHLIGHT
(AUX.)
PANIC
OPERATING INSTRUCTIONS
6 BUTTON REMOTE TRANSMITTER:
BANK #1 (Directly Press Buttons)
Button 1:
Arm
Button 2:
Disarm
Button 3:
Aux #1 (Trunk)
Button 4:
Panic
Button 5:
(Change to BANK #2)
BANK #2* (Press Bank #2 button FIRST,
then within 3 seconds Buttons 1-4)
Button 1:
Silent Arm (No Chirp)
Button 2:
Silent Disarm (No Chirp)
Button 3:
Car Locator (5 light flashes, 1
siren chirp
Button 4:
Aux #2
* Remote LED Blinks 3 seconds for Bank #2.
ACTIVE ARMING
To arm the alarm and lock the doors, press the #1 (Lock Symbol) button on the transmitter. You will hear a single
siren chirp and the lights will flash once. The system will arm, the doors will lock and the starter will be disabled if these
optional features are installed. The red LED in the vehicle will start flashing after 5 seconds. After a short delay to
allow vehicle and electronics to stabilize the system will be completely armed.
ALARM TRIGGERING
If there is an intrusion into the vehicle or hard impact to the body will sound the alarm and flash the lights for 45
seconds. After 45 seconds the system will automatically shut off and re-arm to continue to protect the vehicle. If a
door is left open, the unit will cycle a second time and still continue to protect the other un-tampered zones.
DISARMING
Press the #2 (Unlock) button on the transmitter to disarm the alarm. You will hear 2 siren chirps and the lights will
flash twice. The LED stops flashing. Door will unlock and dome light will turn on if the options are installed. If you are
using the Optional Driver’s priority unlock, then the first press of the unlock button will unlock the driver’s door only and
the second press will unlock the passenger door or doors.
