19
OPERATING INSTRUCTIONS
PRIOR INTRUSION ALERT
If the system was tripped in your absence, the dash LED will be flashing rapidly. When the system is
disarmed you will hear 3 chirps (and 3 light flashes). Carefully inspect your vehicle to see if there is any
damage or a theft has occurred.
DOME LIGHT ILLUMINATION (OPTIONAL)
This feature turns on the vehicles dome light upon disarm for 30 seconds or until the key is inserted and
turned on. This will provide illuminated entry to your vehicle at night or in dimly lit areas for added safety and
security. Note that dome light illumination will deactivate the active rearm feature if programmed for active
rearm.
OPEN ZONE ALERT/BYPASS
If the system detects a faulty or open zone (Door left open) when the system is ACTIVELY ARMED, the siren
will chirp 4 times along with 4 light flashes. The faulty zone will be automatically bypassed.
IGNITION-CONTROLLED DOORLOCKS
The doors will automatically lock when the ignition is turned on and will unlock when the ignition is turned off.
This feature can be programmed on, off, or to lock the doors only.
Doors will not lock if they are open to
prevent locking the keys in.
ACTIVE RE-ARMING (FAIL-SAFE PROTECTION)
Active Re-arming means that the system will re-arm itself 30 seconds after disarmed with the transmitter if a door has
not yet been opened. This is handy if the vehicle is accidentally disarmed (via the transmitter in your pocket) without
you knowing it. This feature can also be turned off in programming option (4). If programmed for Passive Chirp
Countdown, the unit will emit a chirp every 2 seconds until the system Active Re-arms. Active rearm feature is
disabled if you also have dome light illumination installed.
2
nd
AUX. OUTPUT (REMOTE AUX. OUTPUT 2)
To activate the Second auxiliary output Press and hold Button #4 for 3 seconds to activate AUX. channel #2.
ARM/DISARM WITH IGNITION ON (PROGRAM OPTION #15)
This feature allows the system to be armed or disarmed while the ignition is in the ON position or vehicle is running.
The feature is disabled by default and should not be used under normal operating conditions. On an installation with
an add-on remote start module, this option can be enabled to allow the system to be armed or disarmed when the
vehicle has been remote started (Ignition will be ON). Note that you cannot use this feature if you are also using the
Full-time carjack protection. If you add a remote start and the Ignition turns on, a Carjack trigger will be activated.
