* An optional doorlock
interface must be
installed. When
Auxiliary #2 is operated,
all of the doors will
unlock, even if the
vehicle is configured
with Driver’s Door
Priority.
To Activate Auxiliary Output #2:
Press & Hold for 3 Seconds the “Auxiliary #2 Output” Button ( II )
To Activate Auxiliary Output #3:
Press & Hold for 3 Seconds the “Auxiliary Output #3” Button ( III )
Page 16
Hold 3
seconds
CAN OPERATE OTHER
OPTIONAL EQUIPMENT,
ON OR OFF THE
VEHICLE
CAN OPERATE OPTIONAL
WINDOW ROLL-UPS
EXAMPLES:
TYPICALLY USED
FOR OPTIONAL
TRUNK
RELEASE
IF ARMED, THE SYSTEM
WILL DISARM, WITH
3 SIREN CHIRPS
AND 1 LIGHT
FLASH
IF THE SYSTEM IS NOT ARMED,
CONFIRMATION IS 1 SIREN CHIRP
AND 1 LIGHT FLASH
Hold 3
seconds
Hold 3
seconds
THE DOORS WILL UNLOCK*
Auxiliary Output Notes:
• Auxiliary #2 output may be activated anytime, provided the vehicle’s igni-
tion is off. While the ignition is on, the Auxiliary #2 output can be operated
as long as a vehicle door is open; this prevents the output from being acciden-
tally activated while driving.
• If feature #6 is programmed to have the Auxiliary #2 output disarm the sys-
tem, the doors will unlock when it is activated; and there is an audible and
visual confirmation: 3 siren chirps and one light flash if the system also dis-
arms, and one chirp and light flash otherwise.
• Auxiliary #3 output may be activated at any time, regardless of the ignition
being on or off, and regardless of the security system’s status.
• Auxiliary #3 has no audible and/or visual confirmation.
Feature #9 Unlock #1 When Ignition Is Turned Off
(Factory Default Setting On)
This feature configures the system to automatically unlock the vehicle’s
doors every time that the ignition switch is turned off. An exception to this would
be if feature #11 is turned on, and a door being open when the ignition switch is
turned off. If the system is installed without the Driver’s Door Priority unlock
interface, this feature unlocks all of the doors when the ignition switch is turned
off. If Driver’s Door Priority is installed, this feature controls the driver’s door
only, and the next feature will control the automatic unlocking of the other doors.
Programming Unlock #1 When Ignition Is Turned Off:
Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and
released nine times. The system’s response will be nine siren chirps, and the
Status Light flashing nine times, pausing, then repeating. Within 10 seconds,
press and release the transmitter/transceiver’s "Arm/Lock" button to turn on
“Unlock #1 When Ignition Turned Off” (the siren will chirp once) or the "Disarm/
Unlock" button to turn this feature off (the siren will chirp twice).
Page 33
Feature #10
Unlock #2 When Ignition Is Turned Off
(Factory Default Setting Off)
Explained in the previous feature, this feature controls the automatic unlock-
ing of all doors except the driver’s door if Driver’s Door Priority is installed.
Programming Unlock #2 When Ignition Is Turned Off:
Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and
released ten times. The system’s response will be ten siren chirps, and the
Feature #8
Doors Lock When Ignition Is Turned On
(Factory Default Setting On)
This feature configures the system to automatically lock the vehicle’s doors
every time that the ignition switch is turned on. An exception to this would be
if feature #11 is turned on, and a door being open when the ignition switch is
turned on. The two following features, #9 and #10, control the automatic
unlocking operation.
Programming Doors Lock When Ignition Is Turned On:
Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and
released eight times. The system’s response will be eight siren chirps, and the
Status Light flashing eight times, pausing, then repeating. Within 10 seconds,
press and release the transmitter/transceiver’s "Arm/Lock" button to turn on
“Doors Lock When Ignition Turned On” (the siren will chirp once) or the
"Disarm/Unlock" button to turn this feature off (the siren will chirp twice).
