14
Plug-In Easy Valet
TM
Switch
Mount the Easy Valet
TM
switch in a hidden a location that is accessible to the
driver. Use the adhesive pad on the back of the switch to mount it to a flat
surface. Although it is not absolutely necessary to mount the switch in a hidden
location, because the ignition key is needed to disarm the system, a hidden
switch makes it more difficult for a thief who has copied the ignition key. Route
the wires to the system's control module, and insert the Blue connector into the
Blue plug on the control module.
The function of the Easy Valet
TM
switch is to keep the system from arming
during extended stopovers for service stations, maintenance, valet parking, car
washing, etc.; and, in conjunction with the ignition key, to disarm the system
if the transmitter is lost or inoperable.
To Enter “Valet” Mode: (With The System Disarmed)
Press & Hold the Easy Valet switch for 2 seconds.
-The siren will emit two chirps, the parking lights will flash twice, and the
LED indicator will light solid Red to confirm that the alarm is in Valet.
Note: To remind the user that the system in the Valet mode, the siren will
emit a chirp every time the vehicle’s ignition is turned “Off”.
To Exit “Valet” Mode:
Press & Release the Easy Valet switch.
-The LED indicator will turn “Off” to confirm exit from the Valet mode.
Disarming The Security System If The Remote Control Is Lost:
In the event a remote control is lost, damaged, or its batteries have become
exhausted, the Easy Valet
TM
switch and the ignition key can be used to disarm
the security system:
Step 1. With the system in the Armed condition, enter the vehicle via the
driver's door (Be aware that the system will enter an alarm condition
the instant the door is opened).
Step 2. Using the ignition key, turn the vehicle’s ignition to the "On" position.
Step 3. Within 5 seconds, Enter the Override Valet Code by pressing &
releasing the Easy Valet switch the programmed number of times (1-
12). The system will Disarm 4 seconds later.
