ENGLISH
23
22
ENGLISH
Additional Basic Care Tips:
• Keep away from liquids
• Keep in dry, dust-free location
• Avoid excessive heat or cold
• Do not leave in car, where excessive heat may melt or damage plastic components
• Do not expose to direct sunlight for any extended period of time
Frequently Asked Questions
TIP:
For our complete list of frequently asked questions, plus the latest updates to the
User Manual, visit
www.cricutcake.com
.
Q: Do I have to hold down the
Shift
key to use it?
A: No. Just press it once and it will be backlit in green, indicating it is in use.
Q: Are the Creative Feature keys the same for each cartridge?
A: Only the
Shadow
feature is found on most sets. The other five Creative Features are
handpicked by the artist and will vary.
Q: How long will the blade last?
A: Anywhere from 500 to 1500 single cuts, depending on what kind of materials you
are cutting. Replacement blades are inexpensive and easy to change. Refer to the
“Replacing the Cutting Blade” section on page 21 in this manual.
Q: How long will a cutting mat last?
A: Each mat will last anywhere from 25–40 full mat cuts, depending on the size of cuts
and what kind of materials you are cutting. We recommend that you use several mats,
rotating them often. This will extend the overall life of each mat.
Q: Can I use a smaller material size than the size of the cutting mat?
A: Absolutely! Just align a corner of the material with the bottom left corner of the
mat, even in the
Portrait
mode. Once the mat is loaded, use the Blade Navigation
Buttons to move the cutting blade down to the upper right corner of the new material.
Then press the
Set Cut Area
key on the keypad overlay to let the machine know where
to start cutting on the new size of material.
Q: Do I have to finish cutting a full page before unloading the cutting mat?
A: No. You can unload the material and remove just the pieces you need. You can
then reload the material at a later time and navigate the cutting blade to any open
area to resume cutting. If you immediately use the same material for a new cut, press
the
Load Last
key instead of the
Load Mat
key. The
Load Last
key will automatically
return the cutting blade to the place where it stopped cutting.
Q: How does the
Material Saver
mode work?
A: The
Material Saver
mode will “pack in” any selected cuts to optimize the space
needed. See page 13
of this manual.
Q: What does
Real Dial Size
do?
A: By default, your Cricut Cake™ machine will cut characters in proportion to each
other. However, if you want to “break” this proportion and get any character to cut
at the literal dial size, press the
Real Dial Size
key. For instance, with the Size Dial set at
2", a lowercase
a
will actually cut out approximately 1" (2.54 cm) to fit proportionately
with any other cut letter. With
Real Dial Size
selected, that same
a
would cut at a full
2"(5.08 cm).
Q: How is the cut of a character measured?
A: Each character cut is measured from the lowest possible point to the highest
possible point.
Summary of Contents for Cake Personal Electronic Cutter
Page 1: ......
