6
Before using your phone
Before using your phone
7
Before using your phone
Handset description
Battery usage
Battery installation
1. Remove the battery cover from
the unit.
2. Slide the battery into the slot
located at the bottom of the unit
and press until you hear the
“Click”.
Battery removal
1. To remove the battery, push down
on the top of the battery while
inserting your finger into the slot
and pulling up from the back of the
battery and slide it out.
2. Align the cover tabs with the slots
at the top of the device and slide
the battery cover back onto the
unit.
note
If the battery is not correctly
placed in the compartment, the
handset will not turn on and/or the
battery may detach during use.
Battery charging
Power connection
1. Plug the AC Charger into a
standard outlet.
2. Plug the other end of the AC
Charger into the charging port on
your phone. The battery must be
installed in the device to charge
properly.
note
• When you charge the battery with
the phone powered off, you will
see a charging status screen. You
cannot operate the phone until it is
powered on.
1. Earpiece
2. OK key
3. Menu key
4. Speakerphone key
5. Send key
6. Navigation key
7. Contacts menu
8. Schedule key
9. End key
10. Numeric keypad
11. Microphone
12. Camera lens
13. Speaker
14. Headset port
15. Side volume keys
16. Charger port
17. Camera key
12
13
3
1
4
5
7
8
9
11
10
2
6
14
15
16
17
Summary of Contents for CAPTR II
Page 1: ...CAPTR II User Guide...