Cricket CAPTR II, User Manual

Page: 18 / 32

5. Press the Right Soft Key Reset to
reset the stopwatch.
Unit converter
To access the Unit converter:
1. Press the Left Soft Key
Menu >
Tools > Unit Converter .
2. Select the desired type of
measurement, and then press the
Down Key. (Length, Weight,
Volume, Area, Temperature,
Speed)
Voice service
Voice command
To use Voice Command:
1. Press the Left Soft Key
Menu >
Voice Service
>
Voice Command
.
• Call <Name or #> : Use the Call
command to voice dial a name
from your Contact list or a phone
number. When dialing a number,
pronounce each digit, but do not
pause noticeably between the
digits.
• Lookup <Name> : Use the
Lookup command to retrieve and
display information for any name
stored in your Contact list.
• Check <Item> : The Check
command lets you check status
information for your phone.
You can say “Check” or “Check
Status”to see and hear all status
information.
• Press the Left Soft Key Tutorial .
Voice Commands menu
information appears. To return to
the previous page, press the Left
Soft Key
Skip .
• Press the Right Soft Key Settings .
(Confirmation, Adaptation, Audio
Modes, About)
note
• Voice Commands – To use the
voice command, press and hold the
Speaker Key for 3 seconds. To exit
Voice Command, press END Key.
• Speaker Phone – To use the
34
Tools / Voice service
speaker phone, press and release
the Speaker Key. The Speaker
phone icon is displayed in indicator
area. To exit speaker mode, press
and release the Speaker Key.
V.Cmd settings
1. Press the Left Soft Key Menu >
Voice Service
>
V.Cmd settings
.
• Confirmation : You can control
when the system asks you to
confirm a name or number.
You can adapt the system to your
voice for optimal recognition
accuracy. During adaptation,
the system will prompt you to
speak a series of short phrases.
If you need to erase adaptation
data and set the system back to
the factory default, select Reset
Voice.
• Adaptation : You can adapt the
system to your voice for optimal
recognition accuracy. During
adaptation, the system will
prompt you to speak a series
of short phrases. If you need to
erase adaptation data and set
the system back to the factory
default, select Reset Voice.
• Audio Modes : You can control
the level of audio guidance
provided by the system. In
prompt mode (the default), the
system prompts for required
information. In readout mode,
the system prompts for required
information and reads out
the
con tents of the screen. In expert
mode, audio guidance is
provided by beeps only.
• About : It’s shown a Vsuite
information.
Voice memo
Voice Memo allows you to record a
reminder message that can be up to
4 minutes.
1. Press the Left Soft Key
Menu >
Voice Service > Voice Memo .
2. To record a voice memo, press the
Left Soft Key
Record
.
Voice service
35