Crevalle Boats 24 Bay, Owner'S Manual

Page: 94 / 147

94
Exterior Equipment
10.4 Leaning Post/Seat
& Center Console
Standard Leaning Post
The leaning post/seat is made of welded anod-
ized or powder coated aluminum. The base ac-
commodates a large cooler that is secured with
special brackets and straps. It is equipped with
a backrest, storage below the cushion, rigging
tray, cup holders and rocket launcher type rod
holders. Molded in footrests on the rear of the
console makes the helm more comfortable when
the operator and passenger are sitting or stand-
ing at the helm.
The storage compartment below the seat drains
to the cockpit sole and is accessed by releasing
the snap on the strap located at the center rear of
the seat and swinging the seat cushion forward. A
retainer cable holds the seat in the open position.
Always make sure the seat is closed and secure
with the strap and snap before operating the boat.
Optional Helm Seat/Leaning Post
The optional leaning post upgrade includes helm
seats that are equipped with flip up bolsters to
provide more room between the seats and the
helm. The bolsters convert the seats to a leaning
post style seat with a backrest, allowing the op-
erator and passenger to sit or stand at the helm.
It is equipped with a rigging tray, cup holders
and rocket launcher type rod holders and tackle
station. Molded in footrests on the rear of the
console makes the helm more comfortable when
the operator and passenger are sitting or stand-
ing at the helm.
To convert each seat to a leaning post, lift the
front of the seat cushion to raise the bolster and
push it back above the seat cushion. Arm rests
on each side provide a more comfortable driving
position and swing up into the backrest cushion
to make it easier to enter and exit the helm area.
Molded in footrests on the rear of the console
makes the helm more comfortable when the bol-
sters are set to the seat or leaning post positions.
Optional Helm Seat/Leaning Post
Standard Leaning Post
Standard Leaning Post Rigging Tray