RML-O-S
9 SEPT 2019
5
3.
Power Supply
Check the nameplate to determine the required power supply. The Ringmaster is available
in 120V 60Hz or 230V 50Hz. Models.
Connect your Ringmaster only to the correct power source. Failure to do so may result
in personal injury or death and may damage your machine.
Make certain the Motor Rocker Switch on the Ringmaster is in the 'OFF' position when
plugging into power source. Failure to do so may result in personal injury or death
and may damage your machine.
IX.
OPERATING INSTRUCTIONS
Do not attempt to operate your Cretors Cotton Candy machine until you have read
and understood this manual. Failure to do so may result in serious injury or death.
Do not attempt to operate your Cretors Cotton Candy machine unless the installation
instructions have been strictly adhered to. Failure to do so may result in serious injury
or death.
1.
Machine setup
1.
Turn all switches “OFF” and plug the cord into a power outlet with the correct electrical
supply as specified on the nameplate.
2.
Have an adequate supply of granulated sugar on hand. (Coarse sugar is more desirable, if
available.) Color the sugar with the desired color and flavor, according to directions on
the package.
3.
You are now ready to make cotton candy.
2.
Operation
1.
With the
MOTOR AND HEAT
switches ‘OFF’ (0). Fill the Spinner Head about 90% full
with sugar.
Do Not
overfill. After adding sugar, manually rotate the head back and forth
to distribute the sugar evenly in the head. If sugar distribution is uneven the machine will
vibrate and be noisy
Add sugar slowly when Spinner Head is running.
2.
Turn the
MOTOR
switch to the ‘ON’ (I) Position
Caution. Don’t attempt to touch the Spinner Head when it is turning. The Spinner
head turns at 3600 RPM and contact with the Floaters or spinning head may cause
injury.
3.
Turn the
HEAT
Switch to the ‘ON’ position