T3000-M-A/E-O
June 2004
6
BEGIN SERIAL NO.04074420
VI. CONTROL SWITCHES (Not all machines contain all of these switches.)
INDICATOR LIGHT
-Indicates operation of the kettle heat element.
KETTLE HEAT
-Turns kettle heat On/Off.
AGITATOR
-Turns the stirrer blade motor On/Off.
LIGHTS
-Turns light in cabinet and heat pad On/Off. (or cornditioner)
OIL
-Provides power to the oil pump.
DELIVERY
-Initiates the pump cycle (if equipped).
ONE-POP
-Starts One-Pop cycle (delivers oil if equipped with oil pump option).
SALT/SUGAR
-Sets the kettle temperature (and pump) to proper settings.
VIII. OPERATING INSTRUCTIONS
Do not attempt to operate your Cretors popcorn machine until you have read and
understood this manual. Failure to do so may result in serious injury or death.
Do not attempt to operate your Cretors popcorn machine unless the installation
instructions have been strictly adhered to. Failure to do so may result in serious injury
or death.
Operate your Cretors popcorn machine only if it is in sanitary condition (See
SANITATION INSTRUCTIONS
). Failure to do so may result in illness to your
customers.
-
WARNING!
Always add corn to the kettle before adding oil. Failure to do so may
result in the oil being heated too rapidly resulting in a fire.
A. To operate your Cretors popcorn popping machine:
1. Fill the corn measure with corn and the salt measure with salt, and empty these into
the kettle. When making sugar corn, add the correct amount of sugar, rather than
salt, with the measure of corn. Then add oil.
2.
Close the kettle lid by pulling the knob down.
3.
If equipped, move Salt/Sugar switch to desired mode.
4.
Turn on the agitator, turn on the kettle heat.
