Additionally, check to see whether USB extender system has been installed
correctly on the host computer. Refer to the below instructions.
For Windows Software:
1. Open Device Manager.
2. Expand the Universal Serial Bus controllers node.
3. Check to see if the extender system appears on the list of controllers.
If the extender system has been properly installed, it appears on the
list as a “Generic USB Hub.”
For macOS Software:
1. Open System Profiler.
2. In the left column under Hardware, select USB.
3. Check to see if the extender system appears in the USB Device Tree at
the top right of the System Profiler window. If the extender system
has been properly installed, it is listed as a “Hub” under the USB High-
Speed Bus/USB Bus node.
If the USB extender system does not detect correctly or fails to detect,
refer to “
.”
6
USB-EXT-2-LOCAL/USB-EXT-2-REMOTE
Quick Start
USB over Category Cable Extenders
