Software
Crestron
Touch The PC Driver
Device Settings of the RS-232 COM Port in SIMPL Windows’ Configuration
Manager
4. Compile and upload the SIMPL Windows program to the control
system.
5. Proceed to “VT Pro-e Programming” that follows.
VT Pro-e Programming
The Touch the PC V2 and PC configuration must be programmed in VT Pro-e and
the project uploaded to the touchpanel. This entails the following steps, which are
explained in detail in this section.
An RGB object must be created on a page or subpage. To create an RGB object,
perform the following steps.
1. In VT Pro-e, open the touchpanel project.
2. As shown below, make sure that the project window is the active
window.
Project Window Active
3. As shown in the following image, right-click on the project and select
Properties
.
14
•
Touch the PC Driver
Programmer’s Guide – DOC. 5916B
Summary of Contents for Touch The PC Driver
Page 4: ......
