Crestron
TMK-2000L & WMKT-2000L
Trim Ring Mount Kits
4. The TPS-2000L can be installed using the four tapped holes in the
PMK-2000L or BB-2000L. Refer to the latest revision of the
TPS-2000L Operations Guide (Doc. 5972) for details.
WMKT-2000L Procedure
The procedure in this section provides the necessary steps for installation of the
WMKT-2000L into a wall. Complete the steps in the order provided. The only tools
or materials required and not supplied are a drywall saw or equivalent and a level.
1. Locate an area on the wall that is free of miscellaneous wiring and
studs.
2. Make a small hole near the middle of the designated site; verify that the
location is suitable.
NOTE:
Make the cutout as level and smooth as possible. The mounting plate allows
for only minor leveling adjustments. If a larger cutout is accidentally made, consider
purchasing the Crestron Mud Mount Kit, MMK-2000L. It and the mounting plate
supplied with the WMKT-2000L provide a cost-effective means of correction.
Essentially, The combination of these two kits makes up the Crestron Mud Mount
Kit for the Wall, WMKM-2000L. Simply follow the “WMKM-2000L Procedure” in
the latest revision of the Mud Mount Kits Installation Guide (Doc. 6025).
3. Use the drywall saw or equivalent to produce a level, rectangular cutout
in the drywall that measures 6
3
/
8
inches wide (16.159 cm) x 4
7
/
16
inches high (11.283 cm).
4. Insert the symmetrical trim plate into the opening, as shown in the
illustration after this step.
Insert the Trim Plate into the Opening
MOUNTING
PLATE
RECTANGULAR
CUTOUT
TRIM
PLATE
DRYWALL
Installation Guide – DOC. 6026
Trim Ring Mount Kits: TMK-2000L & WMKT-2000L
•
3
