Trim Ring Mount Kits
Crestron
TMK-2000L & WMKT-2000L
5. Carefully pass the mounting plate through the opening and rest it
against the interior surface of the drywall.
6. When the mounting plate is in position, bend the top two flanges of the
trim plate upward (approximately 90 degrees) and the bottom two
flanges downward (approximately 90 degrees). Refer to the illustration
after this step.
NOTE:
The mounting plate will have slight play; this is normal. It allows for minor
adjustments to the TPS-2000L during installation.
Bend Flanges
BEND FLANGES DOWN
APPROXIMATELY 90°
BEND FLANGES UP
APPROXIMATELY 90°
7. Run the necessary cables for the touchpanel and secure them behind the
drywall.
8. The TPS-2000L can be installed using the four tapped holes in the
mounting plate. Refer to the latest revision of the TPS-2000L
Operations Guide (Doc. 5972) for details.
4
•
Trim Ring Mount Kits: TMK-2000L & WMKT-2000L Installation Guide – DOC. 6026
