Crestron
ST-COM
RS-232/422/485 COM Module
7. In the Viewport return display, observe the firmware version of the
ST-COM.
8. Perform the appropriate step.
9. As shown after this step, select
File Transfer | Load Network Device
from the Viewport menu.
Select Load Network Device
10. Select the NET ID of the ST-COM and then click
OK
, as shown in the
diagram after this step.
"Select Network ID" Window
11. Browse to the firmware directory, select the download firmware (UPG)
file and click
Open
, as shown in the diagram after this step. The
transfer is automatically completed.
Operations Guide - DOC. 5695A
RS-232/422/485 COM Module: ST-COM
•
11
