FlipTop Media Center
Crestron
QM-FTMC
Features and Functions (Continued)
•
One RJ-45 Ethernet pass through connector
•
One AC power pass through
•
Two mic inputs with phantom power (on the bottom)
•
One QuickMedia™ RJ-45 connector (on the bottom)
•
Two Cresnet
®
connectors (on the bottom)
•
Low-cost, quick and easy installation
•
Easy setup using Crestron SystemBuilder™ software
•
Optional cable management kit
* As an option, custom-engraved buttons can be designed and obtained by using the Crestron Engraver
software. Version 2.2.2.3 and Crestron Database 16.3.4 or later are available from the Crestron website
(at
).
FlipTop Housing
Handsomely finished in either black anodized or brushed aluminum, the QM-FTMC
mounts flush in any tabletop surface for a clean, professional appearance. The sleek
design of the “FlipTop” lid features an integrated keypad (keypad models only) to
provide programmable pushbutton control at every interface location. Wiring for the
QM-FTMC is extremely simple requiring just a single CresCAT™-QM cable (sold
separately).
Multimedia Interface
Individual inputs are provided for composite, S-video and RGB/component signals,
each with corresponding stereo audio, to accept connections from portable AV
devices and computers. For complete connectivity, the QM-FTMC also includes an
RJ-45 LAN pass through connector and AC power receptacle.
Integrated Keypad (optional)
The QM-FTMC can be ordered with or without a keypad. This customizable keypad
provides 10 to 20 programmable pushbuttons for control of AV, lighting and other
functions. All button caps are engravable and include LED feedback indicators. Two
LED bargraphs are also provided to display level settings and other parameters. To
prevent accidental button presses, the keypad is automatically disabled whenever the
lid is not fully opened.
AV Switcher and Mic Preamp
The built-in 3 x 1 switcher includes audio breakaway to allow the three program
audio inputs to be switched independent of the video and RGB inputs. Additionally,
two gated microphone inputs are included via terminal block connectors located
below the table surface. Both dynamic and condenser type microphones are
supported with software switchable 48V phantom power available at both
microphone inputs. Balanced or unbalanced line level sources such as wireless
microphones can also be accommodated. Input gain and gating controls for each
microphone/line input are fully adjustable at setup and can also be controlled in real
time from a keypad or touchpanel.
QuickMedia™ Transport
Using Crestron’s revolutionary QuickMedia transport, all input signals are
transmitted from the QM-FTMC to any QuickMedia Receiver or Distribution Center
over a single inexpensive CAT5e type cable. Computer resolutions up to 1920 x
1200 pixels at 60 Hz are supported over cable runs up to 450 feet (137 meters).
Audio signals are transmitted digitally with high performance 24-bit resolution.
2
•
FlipTop Data Center: QM-FTMC
Operations & Installation Guide – DOC. 6311B
