FlipTop Media Center
Crestron
QM-FTMC
Connectors, Controls & Indicators (Continued)
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
8
COMPUTER
3
Pin 1
Pin 6
Pin 15
(1) DB15HD female
RGB(VGA)/component video
4
input
Formats: RGBHV, RGBS, RG
s
B, YP
b
P
r
Input impedance: 75 ohms
H/V sync impedance: 1k ohms
Maximum input level: 1 V
p-p
Maximum H/V sync level 5 V
p-p
Signal detection on H, Y and G
s
9
VIDEO
VIDEO
L
R
(1) RCA female, composite video input
Input impedance: 75 ohms
Maximum input level: 1 V
p-p
Includes signal sensing
AUDIO (VIDEO)
(2) RCA female
Unbalanced stereo line level audio input
Input impedance: 10k ohms
Maximum input level: 2 V
rms
10
LAN
8
1
(1) 8-pin RJ-45 female, Ethernet LAN pass-
through jack for connection to Ethernet,
providing local area network or Web access
(cable not included)
PIN
SIGNALS
1
TD+
2
TD-
3
RD+
4
Connected to pin 5
5
Connected to pin 4
6
RD-
7
Connected to pin 8
8
Connected to pin 7
11
(QM)
125 V
(1) 6 foot grounded AC line cord
Passes through to front panel AC power
outlet
11
(QMI)
MAX 250 V
(1) IEC socket
Passes through to front panel AC power
outlet
12
NET
Four-position terminal block connector for
data and power. Connects to Cresnet control
network.
Pin 1 (24) Power
Pin 2 (Y)
Data
Pin 3 (Z)
Data
Pin 4 (G)
Ground
13
SETUP LED &
BUTTON
(1) red LED and miniature pushbutton, used
for touch-settable ID (TSID)
Used for setting network ID during initial
configuration or when the device is being
added/replaced.
(Continued on following page)
12
•
FlipTop Data Center: QM-FTMC
Operations & Installation Guide – DOC. 6311B
