Crestron
QM-TX
QuickMedia™ Transmitter
After entering the appropriate information in each step, SystemBuilder creates
the control system logic and touchpanel pages, ready to upload to the controller.
NOTE:
Crestron SystemBuilder version 2.0 or higher is required.
Creating a QuickMedia System in SystemBuilder
The following information is a general procedure for setting up a QuickMedia
system using SystemBuilder. Refer to the SystemBuilder help file for more
detailed instructions.
1. Open
SystemBuilder and select File | New. Select a
Blank System
.
SystemBuilder – New Blank System
2. Select the plug-in for a QuickMedia system.
SystemBuilder – “Plug-in Selection” Window
3. Select the control processor.
Operations Guide – DOC. 6334
QuickMedia™ Transmitter: QM-TX
•
17
Summary of Contents for QM-TX
Page 1: ...Crestron QM TX QuickMedia Transmitter Operations Guide...
Page 4: ......
