FlipTop Data Center
Crestron
QM-FTDC
•
Crestron Engraver version 2.3.3 or later (only required if using
SystemBuilder).
•
Crestron RoomView
®
version 6.0 (required for room management).
NOTE:
The NB versions may be programmed with the regular QM FlipTop
devices, but will not match during SystemBuilder verification procedure in the
finish stage.
Configuring with SystemBuilder
The easiest method of
programming, but does not
offer as much flexibility as
SIMPL Windows.
Crestron SystemBuilder offers automatic programming for such residential and
commercial applications as audio distribution, home theater, video conferencing, and
lighting. The interface of this tool guides you through a few basic steps for
designating rooms and specifying the control system, touchpanels, devices, and
functionality. Crestron System Builder then programs the system, including all
touchpanel projects and control system logic.
Crestron SystemBuilder is fully integrated with Crestron's suite of software
development tools, including SIMPL Windows, VT Pro-e, Crestron Database,
User IR Database, and User Modules Directory. Crestron System Builder
accesses these tools behind the scenes, enabling you to easily create robust
systems.
NOTE:
Modifications to the program that are made outside of SystemBuilder
(for example, in VT Pro-e or SIMPL Windows) are not preserved when you
reenter SystemBuilder.
SystemBuilder
After entering the appropriate information in each step, SystemBuilder creates
the control system logic and touchpanel pages, ready to upload to the controller.
NOTE:
Crestron SystemBuilder version 2.0 or higher is required.
The following information is a general procedure for setting up a QuickMedia
system using SystemBuilder. Refer to the SystemBuilder help file for more
detailed instructions.
Creating a QuickMedia System in SystemBuilder
1. Open
SystemBuilder and select
File | New
. Select a
Blank System
.
24
•
FlipTop Data Center: QM-FTDC
Operations & Installation Guide - DOC. 6312A