Crestron
PW-2420RU
Power
Pack
Power Pack: PW-2420RU
Description
The PW-2420RU is capable of powering a regulated 24-volt Crestron product from a
standard AC receptacle (120V, 60 Hz or 220V – 240V, 50 Hz). It is designed for indoor use
only.
NOTE:
Only connect this power pack to a Crestron device that is rated at 24 volts
(regulated) and no more than 2 amps. Plugging this power pack into a Crestron device that
has a different rating could damage the device or the pack.
Specifications
Crestron suggests that only this power pack be used with designated Crestron products. In the
event another compatible power pack (not supplied by Crestron) is required, the
specifications are as follows.
Input/Output Specifications
INPUT SPECS
OUTPUT SPECS
120VAC 60Hz
or
24VDC 2A minimum, regulated
230VAC 50Hz
The polarity of the PW-2420RU is illustrated below.
Setup
Complete the following steps to properly setup and connect the power pack. Refer to the
illustration at the conclusion of the procedure.
1. Attach the line cord (supplied) to the IEC320 connector on the power pack.
Operations Guide - DOC. 5892
Power Pack: PW-2420RU
•
1
