Description
The PW-1215WU is a regulated universal LPS (limited power source)
power pack that is used to power a 12 Volt Crestron
®
product from a
standard AC receptacle (100-240 VAC, 50-60 Hz). It is designed for
indoor use only.
CAUTION:
Connect this power pack only to a Crestron device that is
rated at 12 Volts (regulated) and no more than 1.5 Amps. Plugging this
power pack into a Crestron device that has a different rating could
damage the device or the power pack.
Specifications
Specifications for the PW-1215WU are listed in the following table.
PW-1215WU Specifications
SPECIFICATION
DETAILS
Power
Input
Output
100-240 Volts AC, 50/60 Hz
12 Volts DC @ 1.5 Amps, regulated,
using male barrel (5.5 x 2.5 mm)
connector
Cable Length
6 feet (~1.8 meters)
Environmental
Temperature
Humidity
41° to 104° F (5° to 40° C)
10% to 90% RH (non-condensing)
Dimensions
Height
Width
Depth
2.90 in (74 mm)
1.72 in (44 mm)
1.38 in (35 mm) without adapter
Weight
5 oz (144 g)
Further Inquiries
If you cannot locate specific information or have questions after
reviewing this guide, please take advantage of Crestron’s award
winning curstomer service team by calling Crestron at
1-888-CRESTRON [1-888-273-7876].
You can also log onto the online help section of the Crestron website
(www.crestron.com/onlinehelp) to ask questions about Crestron
products. First time users will need to establish a user account to fully
benefit from all available features.
PW-1215WU Power Pack Adapter Insert Set
Setup
Complete the following steps to properly set up and connect the power
pack.
PW-1215WU Power Pack (Shown With and Without Protective Insert)
1.
Slide the thumb switch on the PW-1215WU downward and
remove the protective insert from the unit by pulling the
bottom part toward you, then sliding it downward to release
the tab.
3.
Slide the thumb switch on the PW-1215WU downward and
install the adapter insert into the unit, top part first to engage
the tab, then press the bottom part into place.
2.
Select the proper adapter insert from the set of four.
5.
Insert the power pack into an active AC receptacle.
4.
Attach the barrel connector to the device to be powered.
PW-1215WU Power Pack Hookup
North America
Japan
United Kingdom
Hong Kong
Singapore
Europe
South America
Australia
China
AC
Receptacle
PW-1215WU
Power Pack
Crestron
Device
Please remove it before use
