Crestron PC-350V Series, Product Manual

Page: 53 / 69

53 • PC-350V-12 and PC-350V-18 Product Manual — Doc. 9212A
Ping Interval (minutes): Enter the time interval between ping retry attempts in minutes. The
valid time range is 1-60 minutes.
Power Up Wait Time (minutes): Click the up and down arrow buttons or enter the Power Up
Wait Time (minutes) limit manually to set the amount of time the power controller will wait to
start pinging the target address(es) after power cycling the target outlet(s). The valid time
range is 1-30 minutes.
Reboot Attempts: Select the number of attempts to power cycle the target outlet(s) from the
drop-down menu. A maximum of 10 attempts can be made. After the set number of Reboot
Attempts are reached, the power controller will continue attempting to ping the target
addresses at the set Ping Interval. A successful ping will result in a reset of the Reboot Attempts.
Actions: Use the Enable/Disable button to enable or disable the defined rules.
Outlet Configuration
Use the Outlet Configuration drop-down menu to configure Outlet Name, Startup Delay (second
(s)), and Cycle Delay (second(s)) settings to the corresponding outlet(s).
Outlet Number: Displays the outlet number that corresponds with the outlet on the power
controller.
Outlet Name: Edit the name to identify the connected device.
Startup Delay (second(s)): The delay between outlets turning on for a Power Cycle All Outlets
event or when removing and restoring power to the power controller.
Click the up and down arrow buttons or enter the Startup Delay (second(s)) values manually.
The valid range is 1-10 seconds.
Cycle Delay (second(s)): Up to 300 seconds of delay can be set between the turn off and turn on
of an individual outlet.