Use one of the following procedures to mount the power controller into
a rack:
l
NOTE:
For toolless mounting, the rack must have keyhole slots on
the rack frame or accessory channels with keyhole slots.
l
Mounting the Device With Keyhole Mounts
l
Mounting the Device Without Keyhole Mounts
NOTE:
Unless otherwise indicated in this guide, the installation
procedure is the same for PC-350V-12 and PC-350V-18.
Toolless Mounting
1. Align the keyhole mounts on the rear of the device to the keyhole
slots on the rack frame or the accessory channel.
2. Insert and slide the device down to lock firmly into position.
2
PC-350V-12 and PC-350V-18
Quick Start
Vertical Networked Power Controller & Conditioner with Surge Protection and Metering
