Supplemental Guide – DOC. 7874D
PC-200/PC-300: 8-Outlet Power Conditioners
•
21
Configuration via the LCD Display (PC-300)
Settings for the PC-300 can also be configured using the PC-300's Nav Pad and LCD
display on the front of the unit.
To access the LCD display's setup screens, complete the following steps:
1.
Power on the PC-300. The PC-300 screen displays (this is the display's default
screen).
PC-300 Screen
2.
Select Setup. The PassCode screen displays.
PassCode Screen
3.
The default passcode is "0000." Press the center button on the Nav Pad to enter
the code.
NOTE:
For security purposes, creating a new passcode is strongly
recommended. Navigate to Setup > System > Passcode to create a new
passcode, which is explained in more detail on page 32.
4.
The Setup screen displays.
Setup Screen
Use the LCD display setup screens to configure various settings for the PC-300. The Setup
screen is divided into three sections:
•
Network: Configures the network connection settings
•
System: Configures various system settings
•
Outlets: Controls the status and the start-up delay settings of the rear outlets
Summary of Contents for PC-200
Page 4: ......