For tree mount installation:
1. Route the speaker cable through all the components of the knuckle
adapter bracket.
2. Install the knuckle adapter bracket (not included) to the speaker as
shown in figure B.
NOTE:
The knuckle adapter bracket comprises nut 1, mount base,
mount adapter, and nut 2.
a. Turn nut 1 clockwise until it is secured to the speaker.
b. Fit the mount base onto the threaded end of the speaker, and
rotate it clockwise until it is secured.
c. Attach the mount adapter to the mount base using the Allen
screw.
d. Tighten nut 2 over the threaded end of the mount adapter.
3. Install the tree mount bracket as follows:
a. Place the tree mount bracket (not included) in the mounting
location.
b. Hold the tree mount bracket against the surface to mark the
screw holes.
c. Drill holes at the marked screw hole locations and install three
anchors (not included).
d. Route the speaker cable through the center hole and out of the
cable opening on the tree mount bracket.
e. Secure the tree mount bracket (not included) to a tree using
drywall screws (not included).
4. Attach the speaker to the tree mount bracket by hand threading the
assembled speaker to the tree mount bracket.
5. For optimal sound coverage, adjust the speaker left or right and up or
down.
a. Adjust the speaker left or right by adjusting the mounting base
threads and nut 2.
b. Adjust the speaker up or down by first loosening the allen screw
on the mount base. Adjust the angle to the desired position, then
retighten the screw.
4
REFERENCE OD4-BRZ-T-EACH
Quick Start
Reference 4 in. 2-Way Outdoor Speaker, Bronze Textured, Single
