Above-Ground Installation
install the speakers on a surface or a tree. This accessory must be
purchased separately.
For surface mount installation:
1. Route the speaker cable through all the components of the knuckle
adapter bracket.
2. Install the knuckle adapter bracket (not included) to the speaker as
shown in figure A.
NOTE:
The knuckle adapter bracket comprises nut 1, mount base,
mount adapter, and nut 2.
a. Turn nut 1 clockwise until it is secured to the speaker.
b. Fit the mount base onto the threaded end of the speaker, and
rotate it clockwise until it is secured.
c. Attach the mount adapter to the mount base using the Allen
screw.
d. Tighten nut 2 over the threaded end of the mount adapter.
3. Select a suitable location to mount the surface mount bracket.
4. Install the surface mount bracket as follows:
a. Place the surface mount bracket (not included) in the mounting
location.
b. Hold the surface mount bracket against the surface to mark the
screw holes.
c. Drill holes at the marked screw hole locations and install three
anchors (not included).
d. Route the speaker cable through the center hole and out of the
cable opening on the surface mount bracket.
e. Secure the surface mount bracket to the surface using drywall
screws (not included).
5. Attach the speaker to the surface mount bracket by hand threading
the assembled speaker to the surface mount bracket.
6. For optimal sound coverage, adjust the speaker left or right and up or
down.
a. Adjust the speaker left or right by adjusting the mounting base
threads and nut 2.
b. Adjust the speaker up or down by first loosening the allen screw
on the mount base. Adjust the angle to the desired position, then
retighten the screw.
3
REFERENCE OD4-BRZ-T-EACH
Quick Start
Reference 4 in. 2-Way Outdoor Speaker, Bronze Textured, Single
