Media Presentation Controller
Crestron
MPC-M50
Attach the Mounting Plate
Mounting Plate
(4506280)
Screws (4) 06-32 x 3/4"
(2009211)
Ground Wire
3.
The ground wire from the mounting plate must be attached to an earth
ground (building steel).
NOTE:
Ensure the unit is properly grounded.
4.
Attach cables to the rear of the MPC-M50. Refer to “Hardware Hookup”
which starts on page 16.
5.
Use the two included 04-40 x 1/4” screws to attach the MPC-M50 to the
mounting plate.
CAUTION:
Excess wire that is pinched between the MPC-M50 and the
electrical box could short out. Make sure that all excess wire is completely
inside the electrical box and not between the box and the MPC-M50.
14
•
Media Presentation Controller: MPC-M50
Operations & Installation Guide – DOC. 6814B
