Crestron
TPS-6L
Isys
®
5.7” Wall Mount Touchpanel
Insert the TPS-6L Into the Mounting Surface
7. Tighten the mounting screws evenly and only enough to compress the
mounting clips and secure the TPS-6L squarely in the mounting surface. Do
not over-tighten the screws.
NOTE:
If it becomes necessary to remove the touchpanel from the mounting
surface, the original mounting clips cannot be reused to remount the touchpanel.
Additional mounting clips are available in the Mounting Kit WMKB-6L identified in
“Mounting Options” on page 29.
Installing the Bezel
Use the Crestron Engraver software package to obtain a custom-engraved bezel for
the TPS-6L. Install the bezel as follows.
1. Carefully position the bezel over the face of the touchpanel.
2. Ensure that the bezel is oriented properly and press against the TPS-6L until
the bezel snaps into place.
Operations & Installation Guide – DOC. 6630A
Isys
®
5.7” Wall Mount Touchpanel: TPS-6L
•
33