Crestron
TPS-6L
Isys
®
5.7” Wall Mount Touchpanel
Auto Brightness Control
Select
Auto Brightness Control
to display the AUTO BRIGHTNESS CONTROL
SETUP menu as shown below.
AUTO BRIGHTNESS CONTROL SETUP Menu
•
Press the
ON
and
OFF
(default)
Auto LCD Brightness Control
buttons to
turn that feature on and off.
•
With auto LCD brightness set to ON, the internal light sensor adjusts the
brightness level to accommodate for the current room ambience. If the light
level is above the threshold, the brightness jumps to the high setting; if the
level is below the threshold, brightness jumps to the low setting.
•
Use the
Auto Control Transition Rate
controls to set the time, in seconds,
for the brightness setting to transition from one level to the other.
•
Use the
LCD Threshold
controls to set the level at which the auto
brightness, if set to
ON
, will adjust LCD brightness. The
Current Light
Level
gauge is provided as a guide to setting the threshold.
•
Use the
Key Threshold
controls to set the level at which the auto backlight
control will adjust key backlight brightness. The
Current Light Level
gauge
is provided as a guide to setting the threshold.
The threshold value is constant for all bezel colors. What the panel does
when the sensor reading crosses the threshold differs for white/almond and
black bezels
For white/almond bezels:
When the sensor is below the threshold, the key backlight brightness is
set to the high level.
When the sensor is above the threshold, the key backlight brightness is
set to the low level.
Operations & Installation Guide – DOC. 6630A
Isys
®
5.7” Wall Mount Touchpanel: TPS-6L
•
25