Touchpanel Media Centers
Crestron Isys i/O
™
TPMC-15/17-L Series
Hardware Connections for the TPMC-15-QM-L (Shown Without 9-inch Power Cable)
POWER:
FROM PWR OUT
CONNECTOR
(12.5VDC, 8.4A)
ETHERNET:
10/100 BASE-T
ETHERNET TO LAN
PC CARD:
FOR (2) TYPE II
PCMCIA CARDS
(BEHIND COVER)
QM IN:
CARRIES AUDIO, VIDEO, RGB,
AND MICROPHONE SIGNALS
HEADPHONES
CRESNET:
TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
USB:
FOR 3
RD
PARTY
PERIPHERALS
RS-232:
TO PC OR ANY
RS-232 DEVICE
QM OUT:
CARRIES AUDIO, VIDEO, RGB,
AND MICROPHONE SIGNALS
PWR IN:
FROM TPMC-L-IMC
PWR OUT:
TO POWER PORT
ON TOUCHPANEL
NOTE:
The TPMC-17-QM-L has the same connections.
When connecting power, Crestron recommends using the included TPMC-L-IMC
Interface Module to bring power from the included power supply to the touchpanel.
The TPMC-L-IMC is connected between the power supply and touchpanel and
allows power lines to be run from a remotely located power supply to the touchpanel
using 14 gauge, stranded, speaker wire as shown in the following diagram.
Hardware Hookup
PWR IN:
FROM EXTERNAL
POWER SUPPLY
TO TOUCHPANEL:
(60 ft MAX @ 14 GAUGE x2)
OBSERVE POLARITY
(
+
to
+
and
–
to
–
)
CABLE CONNECTED TO
PWR PORT ON BOTTOM OF
TOUCHPANEL
48
•
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series
Operations Guide - DOC. 6354