Touchpanel Media Centers
Crestron Isys i/O
™
TPMC-15/17-L Series
NOTE:
The touchpanel’s calibration routine can also be accessed through Crestron
Toolbox if the touchpanel is connected to a control system via Cresnet and/or
TCP/IP or to a PC via RS-232 by selecting the device from the Network Device Tree
and right-clicking the device to select
Functions | Setup Mode…
. Select
Enter
Calibration Mode
to begin calibration.
Press
OK
to accept the changes and return to the SETUP MENU.
Display Output (QM-L Versions Only)
Pressing
Display Output
shows the output resolution of the touchpanel and provides
test charts for adjusting skew, peak, and boost settings on a remote display.
“Display Output” Window
Select the following
Test Patterns,
in the following order, and adjust the display as
necessary.
1. Vertical
Lines
2. Grid
3. Color
Bars
4. Grayscale
Gradient
5. Frequency
Adjust
Test
6. Streak
Test
7. Skew
Test
8. RGB
Gradient
Select Project
Permits the selection of the touchpanel program, a .vtz file. The default file location
is the internal flash. To select a project from the internal flash, select
Browse
and
select the compiled project to be loaded.
If loading an external file, check
External
as the
Project Working Path
and use the
Select
button to select the network drive and/or flash drive where the compiled
30
•
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series
Operations Guide - DOC. 6354