iMedia Table Mount Computer Center
Crestron
IM-TCC
AUDIO
The 3.5 mm computer audio connector provides an unbalanced stereo line-level
audio input.
●
Maximum input level 2 V
RMS
●
Input impedance 10k Ohms
COMPUTER
This female DB15HD connector is used for connecting a computer’s RGB
video output to the display device. A corresponding 3.5mm mini-jack is
provided for the computer sound card output.
●
Maximum input voltage 1.0 V
p-p
(R/G/B), 5.0 V
p-p
(H/V)
●
Input Impedance 75 Ohms (R/G/B), 1 k Ohms (H/V)
Refer to the following table for pin-assignments.
RGB DB15HD Pin Assignments
PIN FUNCTION PIN FUNCTION
1
Red Video
9
No Connect
2
Green Video
10
Ground
3
Blue Video
11
No Connect
4
Reserved
12
Monitor Sense 1
5 Ground
13
Horizontal
Sync
6
Red Ground
14
Vertical Sync
7
Green Ground
15
Monitor Sense 2
8
Blue Ground
IM
IM
1
This eight-pin RJ-45 transport port allows connection of the iMedia cable. It
carries audio and video signals over CresCAT-IM cable to an iMedia receiver
(IM-RX1 or IM-RX3). For more information on iMedia cable length refer to the
chart on page 3.
NOTE:
Always use CresCAT-IM cable to make iMedia connections.
Industry Compliance
As of the date of manufacture, the IM-TCC has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
NOTE:
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
6
•
iMedia Table Mount Computer Center: IM-TCC
Operations & Installation Guide - DOC. 6383
