Crestron Green Light DIN-1DIM4, Operations & Installation Manual, Page: 15 / 36

Crestron DIN-1DIM4 DIN Rail 4-Channel Dimmer
Setup
Network Wiring
When wiring the Cresnet
®
network, consider the following:
•
Use Crestron Certified Wire.
NOTE : Cresnet HP cannot be used.
•
Use Crestron power supplies for Crestron equipment.
•
Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results
or damage to the equipment. Please use the Crestron Power
Calculator to help calculate how much power is needed for the
system (
www.crestron.com/calculators ).
•
For networks with 20 or more devices, use a Cresnet Hub/Repeater
(DIN-HUB) to maintain signal quality.
For more details, refer to “Check Network Wiring” which starts on page
27.
Identity Code
The Net ID of the DIN-1DIM4 has been factory set to 98 . The Net IDs of
multiple DIN-1DIM4 devices in the same system must be unique. Net
IDs are changed on the front panel of the DIN-1DIM4 or from a personal
computer (PC) via Crestron Toolbox™ (refer to “Establishing
Communication” on page 20).
To set the Net ID using the front panel:
1. Press the SETUP button to enter the Setup mode. The SETUP
LED illuminates.
2. Press the left button under the NET ID display to change the most
significant digit of the Net ID or press the right button under the
NET ID display to change the least significant digit of the Net ID
number.
Operations & Installation Guide – DOC. 6928A DIN Rail 4-Channel Dimmer: DIN-1DIM4
•
11