Four-Way Coupler
Crestron
SRD-CPL-4
Industry Compliance
As of the date of manufacture, the SRD-CPL-4 has been tested and found
to comply with specifications for CE marking and standards per EMC
and Radiocommunications Compliance Labelling.
Installation
Installation of the SRD-CPL-4 coupler consists of the following. Refer
also to the block diagram on page 2.
Attach the RG-6 cable from the antenna to the port labeled
IN
on
the coupler.
•
NOTE:
For best results in all configurations, use quad-shielded RG-6
cable whenever possible.
•
Attach an F-male to F-male 12-inch cable between one of the
coupler
OUT
ports and the
IN
port of one of the SRD-SPL-4
splitters.
4
•
Four-Way Coupler: SRD-CPL-4
Installation Guide – DOC. 6725A
Summary of Contents for Four-Way Coupler SRD-CPL-4
Page 1: ...Crestron SRD CPL 4 Four Way Coupler Installation Guide ...
Page 4: ......
