Crestron
SRD-CPL-4
Four-Way
Coupler
Four-Way Coupler:
SRD-CPL-4
Introduction
The SRD-CPL-4 is a four-way passive coupler optimized for use in
configuring a multi-port splitter using up to four SRD-SPL-4 Four-Way
Amplified Splitters (sold separately) as part of a Crestron
®
XM or
SIRIUS
®
satellite radio distribution network. Four F-to-F cables, 1 foot in
length, are included for connection between the SRD-CPL-4 and each
SRD-SPL-4, enabling connection to up to 16 satellite radios.
NOTE:
The SRD-CPL-4 is designed for indoor or outdoor mounting.
Block Diagram
The diagram on the following page illustrates a typical application using
the SRD-CPL-4 to connect to four amplified splitters feeding sixteen
radios.
NOTE:
In this typical layout example, the sum total of all the cable
segments between the line amplifier output and the most distant radio
should not exceed 275 ft.
Installation Guide – DOC. 6725A
Four-Way Coupler: SRD-CPL-4
•
1
Summary of Contents for Four-Way Coupler SRD-CPL-4
Page 1: ...Crestron SRD CPL 4 Four Way Coupler Installation Guide ...
Page 4: ......
