Crestron
TPS-6X-DS & TPS-6XNL-DS
Docking
Stations
Operation
Mounting the Touchpanel
To mount the TPS-6X Series, the touchpanel must first be positioned onto the
docking station at a slight angle to latch the top portion of the docking station onto
the touchpanel. Magnets on the TPS-6X-DS attach to metal plates installed on the
TPS-6X to secure the touchpanel in place (refer to the illustration below).
Touchpanel Mounting
Magnets
Latch this part of the
docking station onto the
back of the touchpanel first.
Image in circle above,
shows TPS-6XNL-DS,
with no locking mechanism.
Tilt Adjustment
The TPS-6X-DS head can be tilted 45 degrees from vertical. The amount of
resistance on the tilt mechanism can be changed or locked to a desired tilt angle by
adjusting the tilt clutch using a 7/64” hex wrench (refer to the illustration below).
Touchpanel Tilt Clutch Adjustment
Tilt Clutch
NOTE:
Illustration above shows locking model. Tilt clutch is the same on No Lock
models.
Operations Guide – DOC. 6876B
Docking Stations for the TPS-6X Series: TPS-6X-DS & TPS-6XNL-DS
•
7
