The DM-PSUA-PWS is tested to UL Standards and
requirements by Underwriters Laboratories Inc.
As of the date of manufacture, the DM-PSUA-PWS has been
tested and found to comply with specifications for CE
marking.
Federal Communications Commission (FCC) Compliance
Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
CAUTION
: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could void
the user’s authority to operate the equipment.
NOTE
: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Industry Canada (IC) Compliance Statement
CAN ICES-3(A)/NMB-3(A)
Crestron Electronics, Inc. Installation Guide - DOC. 7795A
15 Volvo Drive Rockleigh, NJ 07647
(2044304)
Tel: 888.CRESTRON
06.15
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
Product warranty can be found at
www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
patents.crestron.com.
Crestron and the Crestron logo are either trademarks or
registered trademarks of Crestron Electronics, Inc. in the
United States and/or other countries. Other trademarks,
registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks
and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or
photography.
This document was written by the Technical Publications
department at Crestron.
©2015 Crestron Electronics, Inc.
