Crestron DM NVX Series Product Manual Download Page 61

Page: 61 / 90

Product Manual – DOC. 8879C

DM-NVX-36x(C) Encoders/Decoders

•

If the image is to be retrieved from a remote server:

In the Remote Path text entry box, enter the URL (HTTP, HTTPS, or FTP) to

access the image file from a remote server. The image is uploaded and

appears in the Preview window.

If you wish to have the image refreshed based on a specified number of

minutes, select the Refresh checkbox, and then select the desired refresh rate

in minutes in the Refresh Rate list box. The refresh rate ranges from 1 to

65,535 minutes. The default setting is 60 minutes.

To disable the background image, set the Background Image toggle switch in the Off

(left) position (default setting).

Summary of Contents for DM NVX Series



























































































Search results

Summary of Contents for DM NVX Series

Reviews:

Related manuals for DM NVX Series

Brands by name

Popular brands

Crestron DM NVX Series, Product Manual

Search results

Summary of Contents for DM NVX Series

Reviews:

Related manuals for DM NVX Series

Brands by name

Popular brands